What we build in Jersey City
Eight disciplines. One standard.
Brownstone and rowhouse renovations, waterfront high-rise condo interiors, single-family and two-family duplex builds — the Jersey City portfolio runs the full residential spectrum. Same standard whether the project is a parlor-floor brownstone gut or a single bath in a waterfront condo.
-
Bathroom remodeling
Brownstone primary suites, rowhouse secondary baths, and waterfront condo powder rooms. Full waterproofing under every wet wall — same Schluter standard regardless of building age. Freight-elevator handling on the high-rises.
-
Kitchen remodeling
Custom cabinetry sized to brownstone-narrow kitchens, slab quartz or marble countertops, and load-bearing wall removals with structural-engineer beam designs for open-plan kitchen-living-dining flow.
-
Apartment, co-op & condo remodeling
Waterfront high-rise alteration agreements, COI requirements, freight elevator scheduling, and lobby protection — all handled under our license. Lighter board governance than Manhattan equivalents on most buildings.
-
Full home remodeling
Multi-floor brownstone gut renovations are the dominant Jersey City full-home build. Original parquet, plaster moldings, and marble mantles preserved; new mechanical systems, kitchens, and baths threaded through the existing envelope.
-
Basement remodeling
Brownstone cellars run lower than suburban basements — code requires 7-foot finished ceiling for habitable space. We waterproof first (interior French drains, sump pumps where needed), then confirm code compliance during design, then build.
-
Marble & natural stone
Slab marble and quartz on kitchen countertops and bath vanities. Restoration of original brownstone marble fireplaces and parlor-floor mantles — cleaned, repaired, or rebuilt from castings when sections are missing.
-
Tile installation
Large-format porcelain, hand-laid mosaic, and hand-glazed ceramic. Original tile patterns referenced in new design where the brownstone has surviving period detail. Schluter waterproofing under every wet wall.
-
Flooring installation
Sand-and-refinish on original brownstone parquet (red oak, white oak, American chestnut depending on era). Engineered wood with acoustic underlayment for upper-floor units in waterfront condos under building rules.
Materials & Standards
Six standards. No shortcuts.
What holds a Jersey City remodel together is the part nobody photographs — the waterproofing under tile, the membrane behind a feature wall, the pressure-tested supply line in a 120-year-old plaster wall. Same standard on a brownstone gut or a waterfront condo bath.
-
Waterproofing.
Schluter or RedGard membrane on every wet wall and shower floor. Pan slope verified before tile. Linear, point, or trough drains — same standard, no exceptions. Critical in Jersey City brownstones where the original cast-iron drains and the cellar below have their own moisture history.
-
Tile.
Dry-laid mockup before adhesive. Mitred outside corners on natural stone. Hand-laid mosaic feature walls. Original brownstone tile patterns referenced when surviving details inform the new design.
-
Stone.
Calacatta, Carrara, statuario slab. Bookmatched walls and waterfall vanities templated on site. Original brownstone marble fireplaces cleaned, repaired, or rebuilt from castings when sections are missing.
-
Fixtures.
Brass and bronze supply lines, pressure-tested before walls close. Premium valves, thermostatic shower controls, and smart-shower diverters — installed to manufacturer spec. NJ code-compliant plumbing throughout.
-
Glass & feature walls.
Frameless shower enclosures, low-iron clear glass, mitred outside corners — nothing thinner than 3/8". Lit niche details and bookmatched feature walls planned in framing, not bolted on after tile.
-
Smart-home & lighting.
Heated electric or hydronic floors, app-controlled shower valves, pre-wired smart mirrors, motion-sensor niche lighting, integrated audio. Roughed in during framing, never after tile.
Process
Four steps. No surprises.
Same four-step process as every project. Jersey City permitting runs through the City of Jersey City Construction Department under our NJ Home Improvement Contractor license — fees and approval cycles are noticeably lighter than NYC. The 5-mile drive from Newark means the project lead can be on site daily without losing the day to logistics.
-
Free consultation
On site or by video. We measure, photograph the existing space, and walk through scope. Same-day response on most inquiries.
-
Design and scope
Drawings, finish selections in three tiers, and a written line-item proposal. You see exactly what’s in and what’s out before you sign.
-
Build
Floor protection in place before tools arrive, dust barriers up before demo. In-house tile and stone setters, trusted licensed plumbers, daily clean-down.
-
Walk-through and warranty
Final punch, deep clean, and the 2-year written workmanship warranty. Pass-through manufacturer warranties on tile, fixtures, and cabinetry.
Service Areas
Where we build.
We’re based in Newark, NJ, and we work across the NYC metro from there. Five boroughs, Long Island, Yonkers, and northern New Jersey are all on the standard route.
And 30+ surrounding cities within a 50-mile radius of Newark, NJ
FAQs
Jersey City-specific questions.
Proximity from Newark, NJ HIC permits, Construction Department filings, NJ Compliance Bond, waterfront condo alteration agreements, brownstone preservation, and basement code-height review — the things that actually decide how a Jersey City remodel runs.
What's the proximity advantage you mention for Jersey City?
Jersey City is roughly 5 miles from our Newark headquarters via the NJ Turnpike or the Pulaski Skyway — about 15 to 25 minutes door-to-door depending on traffic. That's the shortest drive of any city in our service area outside Newark itself, which means same-day site visits are routine, daily site management is efficient, and emergency response (a leak found mid-build, a delivery that needs to be intercepted) is faster than from any other city we work in.
How is Jersey City permitting different from NYC?
Jersey City uses the City of Jersey City Division of Code Enforcement and the local Construction Department for residential permits, governed by NJ state code rather than NYC code. Permit fees are typically lower than NYC equivalents, and approval cycles often run 3 to 8 weeks for standard residential work rather than the longer NYC timelines. We file under our license, manage every inspection, and close out the permit at completion. The NJ Home Improvement Contractor (HIC) license is the relevant credential — separate from the NYC HIC.
Do you work on Jersey City brownstones?
Yes. Jersey City has a substantial pre-war brownstone and rowhouse stock, particularly in older residential areas — similar in character to Brooklyn brownstones but governed by NJ rather than NYC code. Original parquet floors, plaster crown moldings, marble fireplaces, and original casement windows are common. We restore where possible and replace with period-appropriate match where necessary.
Can you remodel high-rise condos along the waterfront?
Yes. The Jersey City waterfront has substantial modern high-rise condo stock — much of it built post-2000. Most waterfront buildings have alteration agreement processes similar to (though typically lighter than) Manhattan equivalents. Freight elevator scheduling, lobby protection, and contractor COI requirements all apply. We've worked the waterfront buildings often enough to know each building's process.
Do you do single-family and rowhouse work in Jersey City?
Yes. Outside the brownstone belt and the waterfront, Jersey City has substantial single-family detached and rowhouse stock — bath, kitchen, basement, and full-home renovations are all in scope. The single-family side runs faster than the multi-family side because there's no alteration agreement layer.
Are you bonded for Jersey City work?
Yes. We carry the $25,000 New Jersey Home Improvement Contractor Compliance Bond required by NJ for residential remodeling work. Bond #M8S0060320, issued by RLI Insurance Company, valid through January 7, 2027. Jersey City is squarely in our NJ-bonded service area.
Can you handle PATH-related access logistics for material delivery?
Yes. Some Jersey City building access (particularly for waterfront condos) coordinates with shared loading docks, scheduled freight times, or the building's own logistics rules. We confirm material delivery windows with the building staff before ordering and coordinate truck timing accordingly. PATH access for the homeowner is helpful for daily commute considerations during the build but isn't typically a contractor logistics issue — we drive.
Do you do basement work in Jersey City brownstones and rowhouses?
Yes. Jersey City brownstones often have cellar-level basements — usable but typically with lower ceiling height than suburban basements. Code requires 7-foot finished ceiling height for habitable space. Rowhouses often have full basements that finish well as family rooms or in-law suites. We waterproof first where the foundation needs it (interior French drains, sump pumps) and confirm code compliance during the design phase.
Project intake